The Fundamentals of Rebar Work
The reinforcement must be prefabricated with stirrups in place for easier on-site assembly. Reinforcing bars must be produced in accordance with the bar bending schedule
How to Perform Hydrometer Analysis?
It is extremely difficult to separate soil particles with a sieve if the particle size is less than 0.075. As a result, a hydrometer is
What are the Basic Soil Tests?
There are some basic soil tests that can be used to investigate the approximate engineering behavior of soils. The most commonly used basic soil tests
What are the Atterberg Limits?
Let’s learn about Atterberg Limits. When fine-grained soils contain clay minerals, they can be remolded without crumbling in the presence of moisture. The adsorbed water
An Introduction to Arches
Natural arches are generally stable when it comes to the load distribution. It contributes to the reduction of bending moments in constructions with extensive spans.
Analysis of Under Reinforced Concrete Beam Section in Flexure According to Euro Codes
Determine the moment of resistance of the beam section given below. Take; fck = 20MPa fyk = 460MPa Calculation Strain Stress Assume the steel has